Dyadnix Nixie clock firmware revision history
v2 (Sept 2011):
- Added more country presets (Australia, NZ, Mexico) for DST (Daylight Savings Time)settings.
- Added DST custom config rules config to enable other locations or future DST rule changes to be setup.
- Added an option to manually toggle the tubes on/off to over-ride the timed or light controlled options.
- Added an option to continually show just the date (calendar mode).
- Changed the time and user configuration setup to gradually speed-up the digit increments when the up button is held pressed.
- Changed the time and user configuration setup for better button-press responsiveness.
- Changed the HV generator frequency and monitor settings to improve HV startup diags and power consumption.
- Changed the power-fail code to be more efficient, to provide longer run-time on the "Supercap" backup.
- Various other changes to optimise the code efficiency.
v1 (December 2011) Original firmware version.
This page was last updated Thursday 15th of September 2011
